Marine

Locking Black Nylon T-Handle. Overall dimension - 3"

Cut-Out - 2-1/2" Surface Depth - 1/8" - 3/4"

Fastener included

Locking White nylon T-Handle Latches Overall diameter: 3"

Cut-Out: 2-1/2" Surface Depth: 1/8" - 3/4" Fastener is included

Non-Locking Black Nylon T-Handle. Overall dimension - 3"

Cut-Out - 2-1/2" Surface Depth - 1/8" - 3/4" Fastener included

.

Non-Locking White Nylon T-Handle.
Overall dimension - 3"
Cut-Out - 2-1/2"
Surface Depth - 1/8" - 3/4"
Fastener included

T-Handle Latch Handle: Black Nylon Body:

Black Nylon no Keyed lock No shaft

T-Handle Latch with Keyed Lock

Available in White Nylon/CP Zamac and Black Nylon/CP Zamac

O.D. - 3"

Cut-Out - 2-1/2"

Surface Depth - 1/8" - 3/4"

Fastener included

Shaft - 3/8" (metric threads)

T-Handle Latch with Keyed Lock

Available in White Nylon/CP Zamac and White Nylon/CP Zamac

O.D. - 3"

Cut-Out - 2-1/2"

Surface Depth - 1/8" - 3/4"

Fastener included

Shaft - 3/8" (metric threads)

Locking T-Handle with Long Shaft.

Made of Black Nylon/C.P. Zamac

Diameter - 3"

Cut-Out - 2-1/2"

Surface Depth - 1/8" - 3/4"

Shaft Length - 1-7/8"

*For use with hatches with a long lip

Non-Locking Black Nylon/C.P. Zamac T-Handle with Long Shaft

Diameter - 3"

Cut-Out - 2-1/2"

Surface Depth - 1/8" - 3/4"

Shaft Length - 1-7/8" *

For use with hatches with a long lip

Black Nylon Body and CP Zamac handle non-locking T-Handle latch.

No Cam

Neoprene O-ring

Without threaded shaft

Chrome Plated Zamac parts should be installed on fresh water boats only.

Replacement Key for P/N's S-226B, S-226W, S-226BLS, 3226B

316 S.S. 90° Offset Cam Bar

Length: 2"

Includes S.S. set screw to adjust distance on shaft.

Shaft - 3/8" (metric threads)

Length measured from center of shaft hole to tip of cam bar.

Cams fit all compression handles and T-handle latches.

316 S.S. Straight Cam Bar

Length: 1-3/4"

Includes S.S. set screw to adjust distance on shaft.

Shaft - 3/8" (metric threads)

Length measured from center of shaft hole to tip of cam bar.

Cams fit all compression handles and T-handle latches.

316 S.S. Offset Cam Bar

Length: 2-3/8"

Includes S.S. set screw to adjust distance on shaft.

Shaft - 3/8" (metric threads)

Length measured from center of shaft hole to tip of cam bar.

Cams fit all compression handles and T-handle latches.

Zinc Cam Bar

Straight -Long

Length - 2-5/8"

Shaft - 3/8" (metric threads)

Zinc Replacement Cam Bar - Offset (Short)

Size - 2-1/4"

Shaft - 3/8" (metric threads)

Zinc Replacement Cam Bar - Offset (Long)

Length - 2-7/8"

Shaft - 3/8" (metric threads)

Offset-Long Star with Opening

Length: 2-7/8"

Includes S.S. Set Screw to adjust distance on shaft.

Length is measured from center of shaft hole to tip of Cam Bar Fits Plastic & S.S. bodies

316 S.S. Cam (Long/Offset) for 316 S.S. Locking (S-235) and Non-Locking (S-236) 3" body Compression Handle

Length: 2-7/8"

Includes S.S. set screw to adjust distance on shaft.

Shaft - 3/8" (metric threads)

Length measured from center of shaft hole to tip of cam bar.

Fits all compression handles and T-handle latches.

316 S.S. Offset-Short Cam Bar

Length: 2-1/8"

Includes S.S. Set Screw to adjust distance on shaft.

Shaft - 3/8" (metric threads)

Length is measured from center of shaft hole to tip of Cam Bar Fits Plastic & S.S. bodies

316 S.S. Offset-Straight Replacement Cam Bar Length: 2-1/8" Includes S.S. Set Screw to adjust distance on shaft. Length is measured from center of shaft hole to tip of Cam Bar Fits Plastic & S.S. bodies

Shaft - 3/8" (metric threads)

316 S.S. Offset short Cam Bar

Length: 2-1/8" use with 2' latches

Includes S.S. set screw to adjust distance on shaft.

Length measured from center of shaft hole to tip of cam bar.

Cams fit all compression handles and T-handle latches.

316 S.S. Short Straight Cam Bar

Length: 2-1/8"

Use with 2" latches

Includes S.S. set screw to adjust distance on shaft.

Length measured from center of shaft hole to tip of cam bar.

Cams fit all compression handles and T-handle latches.

.

Black Nylon T-Handle Striker Plate

Length: 2-7/8"

Width: 1/2"

Fastener: #10 (2)

.